Graphic Cards (Expanded)
|
Graphic Cards (On Board)
|
Sound Cards (Expande)
|
Sound Cards (On Board)
|
Network Cards
|
Wireless Network Cards
|
back to main
Notice:
Haiku R1Beta3 is installed on internal hard drive as main OS. Haiku R1Beta3 is installed on internal hard drive as main OS. Everything except sound and the SD card slot work perfectly fine. Haiku R1Beta3 is installed on internal hard drive as main OS. Everything except sound and the SD card slot work perfectly fine. Wifi works and is stable,touchpad even supports gestures like scrolling with two fingers.
back to main
Notice:
Sound does not run every time i boot into Haiku.
back to main
Notice:
back to main
back to main
back to main
back to main
Notice:
Need to set the screen resolution over bootoptions of Haiku to start the system. Need to set the screen resolution over bootoptions of Haiku to start the system. Sound und Network not tested, because not available by testing.
back to main
Notice:
Date manufacured June 2015 Date manufacured June 2015 Date manufacured June 2015 No Network for testing available
back to main
Notice:
Tested using a USB stick using Haiku R1Beta3. Tested using a USB stick using Haiku R1Beta3. Worked alright in my current test. Tested using a USB stick using Haiku R1Beta3. Worked alright in my current test. I remember from a previous experience with R1Beta2 on this machine that it can crash under heavy load,which is a known issue with older AMD processors.
back to main
Notice:
back to main
back to main
Notice:
1 x DVI-I 1 x DVI-I 1 x Audio: line-in / microphone 1 x DVI-I 1 x Audio: line-in / microphone 1 x Audio: line-out / headphone 1 x DVI-I 1 x Audio: line-in / microphone 1 x Audio: line-out / headphone 1 x CF-card 1GB Flash drive 1 x DVI-I 1 x Audio: line-in / microphone 1 x Audio: line-out / headphone 1 x CF-card 1GB Flash drive max resolution 1920 x 1200 pixel
back to main
Notice:
Network and Audio not tested, because not avilable by testing Network and Audio not tested, because not avilable by testing Network and Audio not tested, because not avilable by testing Network and Audio not tested, because not avilable by testing Network and Audio not tested, because not avilable by testing Network and Audio not tested, because not avilable by testing Network and Audio not tested, because not avilable by testing
back to main
Notice:
Running Haiku from a USB Stick with R1Beta3. Running Haiku from a USB Stick with R1Beta3. The screen is 90 degree rotated as the GPD Win has a phone display, Haiku doesn't support fixing that on the software-side yet. Running Haiku from a USB Stick with R1Beta3. The screen is 90 degree rotated as the GPD Win has a phone display, Haiku doesn't support fixing that on the software-side yet. It has a USB-C port,but nothing I plugged in here worked. Running Haiku from a USB Stick with R1Beta3. The screen is 90 degree rotated as the GPD Win has a phone display, Haiku doesn't support fixing that on the software-side yet. It has a USB-C port,but nothing I plugged in here worked. Haiku on this device is in a state that's absolutely not fun to use, and you can't do much with it.
back to main
Notice:
Screenresolution changed to 1680x1050 automatically (out of range). Screenresolution changed to 1680x1050 automatically (out of range). No Sound and LAN tested, because not available by testing
back to main
back to main
Notice:
Running Haiku from a USB Stick with R1Beta3. Running Haiku from a USB Stick with R1Beta3. Everything works good here. Running Haiku from a USB Stick with R1Beta3. Everything works good here. The SD card slot is missing in the Devices app,but actually works. Running Haiku from a USB Stick with R1Beta3. Everything works good here. The SD card slot is missing in the Devices app,but actually works. Graphics works better than on many other OSes,boots directly to the native resolution,but some finetuning in the settings of the monitor was needed at the first try as it was a bit blurred,worked fine automatically afterwards.
back to main
Notice:
Sound and network not tested, because not available by testing.
back to main
back to main
Notice:
- Need to change to legacy boot - Need to change to legacy boot - Need to use fail safe boot option: Disable local APIC
back to main
back to main
Notice:
- no sound tested, because no speaker around - no sound tested, because no speaker around - no network tested, because not network around
back to main
Notice:
- Not Internet to test network card - Not Internet to test network card - no speaker to test audio - Not Internet to test network card - no speaker to test audio - Not Internet to test network card - no speaker to test audio - Need to switch resolution at bootmenu to 1024x768 32bit to start the system. After start i have the the full resolution automatically
back to main
Notice:
- Intern speaker working - Intern speaker working - No internet to test network card
back to main
back to main
Notice:
WLAN was working for short time only? WLAN card needs 1802 bios-patch.
back to main
back to main
Notice:
- Sound not testes, no speaker installed - Sound not testes, no speaker installed - Network not tested, not connected by testing
back to main
Notice:
-onboard sound is working with poor quality compared to audigy 2 zs -onboard sound is working with poor quality compared to audigy 2 zs -two cold boots from usb3 with kdl and haiku boots on third attempt from -onboard sound is working with poor quality compared to audigy 2 zs -two cold boots from usb3 with kdl and haiku boots on third attempt from -onboard sound is working with poor quality compared to audigy 2 zs -two cold boots from usb3 with kdl and haiku boots on third attempt from usb3 port! -onboard sound is working with poor quality compared to audigy 2 zs -two cold boots from usb3 with kdl and haiku boots on third attempt from usb3 port! -actually some ahci quirks, tail -v -f /boot/system/var/log/syslog -onboard sound is working with poor quality compared to audigy 2 zs -two cold boots from usb3 with kdl and haiku boots on third attempt from usb3 port! -actually some ahci quirks, tail -v -f /boot/system/var/log/syslog gives following output which is repeated every second: -onboard sound is working with poor quality compared to audigy 2 zs -two cold boots from usb3 with kdl and haiku boots on third attempt from usb3 port! -actually some ahci quirks, tail -v -f /boot/system/var/log/syslog gives following output which is repeated every second: -onboard sound is working with poor quality compared to audigy 2 zs -two cold boots from usb3 with kdl and haiku boots on third attempt from usb3 port! -actually some ahci quirks, tail -v -f /boot/system/var/log/syslog gives following output which is repeated every second: KERN: ahci: PhyReady Change -onboard sound is working with poor quality compared to audigy 2 zs -two cold boots from usb3 with kdl and haiku boots on third attempt from usb3 port! -actually some ahci quirks, tail -v -f /boot/system/var/log/syslog gives following output which is repeated every second: KERN: ahci: PhyReady Change KERN: ahci: Enable: port 2 -onboard sound is working with poor quality compared to audigy 2 zs -two cold boots from usb3 with kdl and haiku boots on third attempt from usb3 port! -actually some ahci quirks, tail -v -f /boot/system/var/log/syslog gives following output which is repeated every second: KERN: ahci: PhyReady Change KERN: ahci: Enable: port 2 KERN: ahci: Probe: port 2 link speed 1.5Gb/s -onboard sound is working with poor quality compared to audigy 2 zs -two cold boots from usb3 with kdl and haiku boots on third attempt from usb3 port! -actually some ahci quirks, tail -v -f /boot/system/var/log/syslog gives following output which is repeated every second: KERN: ahci: PhyReady Change KERN: ahci: Enable: port 2 KERN: ahci: Probe: port 2 link speed 1.5Gb/s KERN: ahci: AHCIPort::SoftReset port 2 -onboard sound is working with poor quality compared to audigy 2 zs -two cold boots from usb3 with kdl and haiku boots on third attempt from usb3 port! -actually some ahci quirks, tail -v -f /boot/system/var/log/syslog gives following output which is repeated every second: KERN: ahci: PhyReady Change KERN: ahci: Enable: port 2 KERN: ahci: Probe: port 2 link speed 1.5Gb/s KERN: ahci: AHCIPort::SoftReset port 2 KERN: ahci: Disable: port 2 -onboard sound is working with poor quality compared to audigy 2 zs -two cold boots from usb3 with kdl and haiku boots on third attempt from usb3 port! -actually some ahci quirks, tail -v -f /boot/system/var/log/syslog gives following output which is repeated every second: KERN: ahci: PhyReady Change KERN: ahci: Enable: port 2 KERN: ahci: Probe: port 2 link speed 1.5Gb/s KERN: ahci: AHCIPort::SoftReset port 2 KERN: ahci: Disable: port 2 KERN: ahci: Enable: port 2 -onboard sound is working with poor quality compared to audigy 2 zs -two cold boots from usb3 with kdl and haiku boots on third attempt from usb3 port! -actually some ahci quirks, tail -v -f /boot/system/var/log/syslog gives following output which is repeated every second: KERN: ahci: PhyReady Change KERN: ahci: Enable: port 2 KERN: ahci: Probe: port 2 link speed 1.5Gb/s KERN: ahci: AHCIPort::SoftReset port 2 KERN: ahci: Disable: port 2 KERN: ahci: Enable: port 2 KERN: ahci: AHCIPort::PortReset port 2 -onboard sound is working with poor quality compared to audigy 2 zs -two cold boots from usb3 with kdl and haiku boots on third attempt from usb3 port! -actually some ahci quirks, tail -v -f /boot/system/var/log/syslog gives following output which is repeated every second: KERN: ahci: PhyReady Change KERN: ahci: Enable: port 2 KERN: ahci: Probe: port 2 link speed 1.5Gb/s KERN: ahci: AHCIPort::SoftReset port 2 KERN: ahci: Disable: port 2 KERN: ahci: Enable: port 2 KERN: ahci: AHCIPort::PortReset port 2 KERN: ahci: Disable: port 2 -onboard sound is working with poor quality compared to audigy 2 zs -two cold boots from usb3 with kdl and haiku boots on third attempt from usb3 port! -actually some ahci quirks, tail -v -f /boot/system/var/log/syslog gives following output which is repeated every second: KERN: ahci: PhyReady Change KERN: ahci: Enable: port 2 KERN: ahci: Probe: port 2 link speed 1.5Gb/s KERN: ahci: AHCIPort::SoftReset port 2 KERN: ahci: Disable: port 2 KERN: ahci: Enable: port 2 KERN: ahci: AHCIPort::PortReset port 2 KERN: ahci: Disable: port 2 KERN: ahci: PhyReady Change -onboard sound is working with poor quality compared to audigy 2 zs -two cold boots from usb3 with kdl and haiku boots on third attempt from usb3 port! -actually some ahci quirks, tail -v -f /boot/system/var/log/syslog gives following output which is repeated every second: KERN: ahci: PhyReady Change KERN: ahci: Enable: port 2 KERN: ahci: Probe: port 2 link speed 1.5Gb/s KERN: ahci: AHCIPort::SoftReset port 2 KERN: ahci: Disable: port 2 KERN: ahci: Enable: port 2 KERN: ahci: AHCIPort::PortReset port 2 KERN: ahci: Disable: port 2 KERN: ahci: PhyReady Change KERN: ahci: Port Connect Change -onboard sound is working with poor quality compared to audigy 2 zs -two cold boots from usb3 with kdl and haiku boots on third attempt from usb3 port! -actually some ahci quirks, tail -v -f /boot/system/var/log/syslog gives following output which is repeated every second: KERN: ahci: PhyReady Change KERN: ahci: Enable: port 2 KERN: ahci: Probe: port 2 link speed 1.5Gb/s KERN: ahci: AHCIPort::SoftReset port 2 KERN: ahci: Disable: port 2 KERN: ahci: Enable: port 2 KERN: ahci: AHCIPort::PortReset port 2 KERN: ahci: Disable: port 2 KERN: ahci: PhyReady Change KERN: ahci: Port Connect Change Last message repeated 1 time
back to main
Notice:
This laptop has Haiku Nightly installed as main OS and most of the hardware works fine. This laptop has Haiku Nightly installed as main OS and most of the hardware works fine. The SD card slot does not work. This laptop has Haiku Nightly installed as main OS and most of the hardware works fine. The SD card slot does not work. Wifi disconnects sometimes,but it's usable.
back to main
Notice:
Wifi Occasionally drops. Webcam not working.
back to main
Notice:
Running Haiku from a USB Stick with R1Beta3. Running Haiku from a USB Stick with R1Beta3. Wifi finds networks,but can't connect to any of them (upstream driver issue, same happens on FreeBSD). Running Haiku from a USB Stick with R1Beta3. Wifi finds networks,but can't connect to any of them (upstream driver issue, same happens on FreeBSD). USB-C Ethernet adapter is seen by Haiku,but can't connect too (stays at Configuring forever). Running Haiku from a USB Stick with R1Beta3. Wifi finds networks,but can't connect to any of them (upstream driver issue, same happens on FreeBSD). USB-C Ethernet adapter is seen by Haiku,but can't connect too (stays at Configuring forever). Touchscreen and touchpad both don't work,have to use a external USB mouse.
back to main
Notice:
back to main
back to main
Notice:
- Sound: Media Server crashes then i run a media file - Sound: Media Server crashes then i run a media file - On older revisions of Haiku i have long time black screen. Then it hangs long time on the fourth icon (harddisks) - Sound: Media Server crashes then i run a media file - On older revisions of Haiku i have long time black screen. Then it hangs long time on the fourth icon (harddisks) - Haiku does not see all partitions (harddisks)
back to main
Notice:
It runs Haiku R1Beta3 installed as main OS on the internal hard drive. It runs Haiku R1Beta3 installed as main OS on the internal hard drive. A custom desktop computer, originally made for gaming. It runs Haiku R1Beta3 installed as main OS on the internal hard drive. A custom desktop computer, originally made for gaming. Some of the not that common parts don't work, but everything you need for a office/development computer works.
back to main
Notice:
Need to boot the USB stick from the Bootmenu of the BiOS. Need to boot the USB stick from the Bootmenu of the BiOS. First time starting the system with Haiku i get two screens in one (2x mouse, 2xtracker...). After setup the screen preferences all good.
back to main
Notice:
USB 3.0 not working.
toshiba |
Manufacturer: | Toshiba | CPU: | Intel i5 - cores:4 | Memory size: | 8GB | Graphic card (On Board): | Nvidia geforce with CUDA | Tested on: | hrev49974 | |
back to main